The Analysis Tech Phase 10/11 Thermocouple Port Calibrator is used to calibrate the reference thermocouple ports of the Phase 10 and Phase 11 Thermal Analyzers. Using a fully automated WinTherm procedure, precise thermocouple inputs from the calibrator are used to adjust the thermocouple port accuracies to ± 0.1°C typical, and ± 0.2°C maximum. The Thermocouple Port Calibrator can be conveniently returned to the Analysis Tech factory each year for re-certification to NIST traceable calibration standards. The Phase 10/11 Thermocouple Port Calibrator is supplied complete with a protective carrying case, (4) alkaline batteries and the necessary cables. Note: requires WinTherm v1.10 or higher. Mechanical Specifications Dimensions 8.5" H x 4.5" W x 1.75" D Weight 1.5 lbs Ordering Information Part Number: TC-Calibrator Standard delivery 1 week. Ex Works (EXW)
	about us | event detectors | semiconductor thermal analyzers | material thermal testers downloads | sales agents | search | contact us | site map Copyright © 2005 Anlaysis Tech, Inc. All rights reserved. Wakefield, Massachusetts USA | (781) 245-7825 | Fax: (781) 246-4548 | E-mail: info@analysistech.com