|
Power Boosters are available to extend the heating current range above the maximum 10 or 20 amp level of the stand-alone Thermal Analyzers. The Power Booster includes its own DC heating supply and is controlled by the Thermal Analyzer using the same software and user-interface controls for all steady state and transient test methods. From the operator's perspective, using the Power Booster simply involves a change in the wires (cables) used for heating power delivery. It can be used for all device types normally tested by the Thermal Analyzers but more typically for diodes, IGBTs, MOSFETS, and Thyristors.
 The Power Booster features safe and convenient twist-lock high-current panel connectors with ultra-flexible cables for power-delivery to the device under test. All connectors are color-coded and keyed for polarity to prevent mistakes in setup. All necessary cables and interface connections up to the device fixture and AC power link are included.
Power Boosters are rated by maximum steady state heating current capacity. The most popular Power Booster offers heating power limits of 200 A at 20V. Other sizes are available for currents from 100 to 400 amps and voltages from 5 to 100 volts within a total power output limit of 4kW. Power Boosters also offer surge testing capabilities with a variety of programmable surge sequences.
Features
| ▪ |
Designed for convenient for in-house calibration |
| ▪ |
Standard and custom fixturing for various power-devices |
| ▪ |
Compatible with all existing Analysis Tech test fixtures |
| ▪ |
Complete instructions and warranty |
Mechanical Specifications
| Dimensions |
10" H x 17 " W x 17 " D (30 lbs)
10" H x 17 " W x 28 " D:(115 lbs) |
| Total Weight |
170 lbs |
| AC Power (Standard) |
208 VAC-3 phase |
Ordering Information
Part number Booster-xxx-yyy, where xxx is the output current (200 A, standard), and yyy is the AC supply voltage (208VAC, 3 Phase standard). Standard delivery: 8 weeks. Ex Works Wakefield, MA. Custom orders welcome.
|
